Wie sind die Öffnungszeiten?

Montag 08:00 - 17:00 Dienstag 08:00 - 17:00 Mittwoch 08:00 - 17:00 Donnerstag 08:00 - 17:00 Freitag 08:00 - 17:00

IMTEX GmbH - Textile machinery

Startseite
Deutschland
Krefeld
IMTEX GmbH - Textile machinery

Our company deals with used weaving, spinning, dyeing, finishing and printing machines for the textile industry.

23/02/2026

Product no.: 0240

8 Picanol gripper weaving machines , type Gammax GC , y.o.c. 2004 , width: 220 cm , 8 colours , Stäubli dobby for 20 Shafts , 20 Shafts are installed , 1 loom has orjinal eldec system , 4 weft feeders , 1.5 warp beams , 1.5 cloth roller , 10 heald frames , 5000 droppers , 5000 wires

For further technical details, photos, and availability:
Visit www.im-tex.com

23/02/2026

Product no.: 0242

40 Picanol gripper weaving machines , type Gammax FF , y.o.c. 2007 , width 190 cm , 8 colours , with Stäubli dobby for 20 Shafts , 18-20 Shafts are installed , 4 weft feeders , 10 heald frames , 1.5 warp beams , 1.5 cloth rollers , 5000 droppers , 5000 wires

For further technical details, photos, and availability:
Visit www.im-tex.com

23/02/2026

Product no.: 0241

20 Picanol gripper weaving machines , type OptiMax-i , GC gripper , y.o.c. 2016 , width 220 cm , Stäubli dobby for 20 Shafts , 16 Shafts are installed , 4 weft feeders , 1.5 warp beams , 1.5 cloth rollers , 5000 droppers , 5000 wires

For further technical details, photos, and availability:
Visit www.im-tex.com

23/02/2026

Product no.: 0239

50 Sulzer gripper weaving machines , type G6500 , nominal width 190 cm , y.o.c. 2008 , 16 Shafts , speed 450 picks/min. , with electronic Fimatextile dobby type SP7 , power supply 400 Volts / 50 Hz , Control & monitoring of parameters through a central microprocessor , Let off & Take up with servo motor , Lef off gearing for weft density of range 6---100 picks/cm , Direct drive with inverter (allow speed adjustment ) , Positive whip roller , Back rest roller with load cell , Automatic pick finding , Frame drive for 16 heald frames , DRC4 heald frame connection , Frame provision for heald of 13 inch , Warp beam fl**ge diameter of 1000 mm , 4 Prewinder with switch-over function at weft break ( LGL Model Vector) 4 colours , Warp stop motion Type Actex A625C ( 6 rails)

For further technical details, photos, and availability:
Visit www.im-tex.com

23/02/2026

Product no.: 0238

6 Dornier gripper weaving machines , type PTS 8/S C , working width 210 cm , y.o.c. 2013 , Stäubli dobby for 16 Shafts , 16 Shafts are installed , 4 warp beams , 16 heald frames , 8 weft feeders , 6 warp stop motion

For further technical details, photos, and availability:
Visit www.im-tex.com

11/02/2026

Product no.: 0185

1 Monforts stenter , type 5F MONTEX 5000 , y.o.c. 2003 , width 220 cm , working width 200 cm , 5 chambers , gas heating , horizontal hain with pin , 2 Küsters / Feyen Foulards type 222.50.2200 and 222.52.2200 , with Lenze inverters , PLEVA weft straightener , Maxon burners type VALUPAK MF 300 , cooling zone , exit with plaiter of big batcher

For further technical details, photos, and availability:
Visit www.im-tex.com

11/02/2026

Product no.: 0228

1 Küsters Cold Pad Batch , type 222.17-3200 , y.o.c. 1990 , width 340 cm , working width 320 cm , colour kitchen with 3 tanks , Erhardt+Leimer fabric guide system , exit on big batcher

For further technical details, photos, and availability:
Visit www.im-tex.com

11/02/2026

Product no.: 0234

1 Lafer equalizing machine , type AZL , y.o.c. 2017 , working width 240 cm , roller width 260 cm , entry from plate or big batcher , vertical pin chain , exit in plate

For further technical details, photos, and availability:
Visit www.im-tex.com

11/02/2026

Product no.: 0171

14 Picanol jacquard weaving machines , type GamMax-8-J-3400 , y.o.c. 2005 , working width 340 cm , 8 colours , with Stäubli jacquard type LX 1600B , 2688 hooks , JC5 controller , free flight , 8 Picanol weft feeders type Chrono X2

For further technical details, photos, and availability:
Visit www.im-tex.com

11/02/2026

Product no.: 0159

12 Dornier gripper weaving machines , tpye PTVS 6/S , y.o.c. 2004 , 4 weft feeders , width 220 cm , with Dialog Panel AT2 , Stäubli 2670/2 P2 dobby for 20 Shafts , 20 Shafts are installed , 12 heald frames , machincal tuck-in , 5000 droppers , 5000 wires , 1.5 cloth roller , 1.5 warp beams with a dia. of 800 mm

For further technical details, photos, and availability:
Visit www.im-tex.com

11/02/2026

Product no.: 0235

1 Lafer shearing machine , type CMI100M , y.o.c. 2017 , working width 180 cm , roller width 200 cm , 1 shearing knife , entry with plate or big batcher , exit in plate

For further technical details, photos, and availability:
Visit www.im-tex.com

05/02/2024

Product no.: 0140

1 Salvade Steamer, type VPM180, capacity 180 m, working width 200 cm, y.o.c. 2018 , entry and exit from the same side, with Salvade Steam cooling down system, Flexible number of rods can be used, ceiling heating, Steam consumption 400 - 800 kg/h

For further technical details, photos, and availability:
Visit www.im-tex.com

Adresse

HubertusStr. 93
Krefeld
47798

Öffnungszeiten

Montag	08:00 - 17:00
Dienstag	08:00 - 17:00
Mittwoch	08:00 - 17:00
Donnerstag	08:00 - 17:00
Freitag	08:00 - 17:00

Telefon

+4921519718222

Webseite

http://www.im-tex.com/

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von IMTEX GmbH - Textile machinery erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.