ECU TOOLS SHOP

04/09/2023

https://ecutools.eu/chip-tuning/mmc-flasher/

MMC Flasher

04/09/2023

❗️ M&D flasher license for GM ACDelco E37/E38 is open for pre-order! ❗️
✅ PRE-ORDER License 90 — GM ACDelco E37/E38 ECU BENCH/OBDII is up!
The module works with ACDelco E37/E38 in OBDII Mode or Bench Mode.... Mehr anzeigen

04/09/2023

❗️ K-TAG and KESSv2 special offers! ❗️
⭐️ Starting today until April 3rd inclusive, K-TAG and Kess v2 users have special offers for subscription renewals.
To receive an individual offer please contact us via email: [email protected]... Mehr anzeigen

04/09/2023

❗️ BitBox Full is now available! ❗️
➡️ Set of BitBox modules with all modules available at this moment included.
If you have any BitBox module/modules u can contact [email protected] to get individual offer to get missing modules to Full set. You will be able to get the new modules with a special discount.
This set is already with maximum discount implemented and cannot be summed up with other offers.
✅ BitBox Full (https://ecutools.eu/chip-tuning/bitbox/bitbox-full/)

04/09/2023

❗️ New tools in our catalog: DFOX Master and Slave! ❗️
⭐️ DFOX from DFB TECHNOLOGY allows serial communication with the Engine and Automatic transmission control units via the OBD diagnostic socket. It is a professional software for reading and programming the control units of:
✅ Cars
✅ Trucks
✅ Motorbikes
✅ Tractors
✅ Boats
✅ Additional TCU package available for Automatic Transmissions
➡️ It also allows communication in the following modes:
✅ BDM and JTAG
✅ BOOT Mode
✅ BENCH Mode (or Service mode)
✅ FULL SYSTEM via pinout
➡️ Compatible operating systems:
✅ Windows 7
✅ Windows 8/8.1
✅ Windows 10
✅ Windows 11!
➡️ Minimum recommended requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
The tool has annual subscription, though it is not mandatory for working.
ECUTools are the first and only dealer of DFB TECHNOLOGY in Russia!
➡️ DFOX Master (https://ecutools.eu/chip-tuning/dfox-master/)
➡️ DFOX Slave (https://ecutools.eu/chip-tuning/dfox-slave/)

04/09/2023

⭐️❗️ PCMflash Update! ❗️ ⭐️
New modules and additions to the current protocols in PCMflash (https://ecutools.eu/chip-tuning/pcmflash/)!
✅ Module 82 (https://ecutools.eu/chip-tuning/pcmflash/module-82/): Bosch SH725XX TCU Bootloader, designed to work in service mode (on the bench) with Bosch TCUs with SH725xx microcontrollers, available in ZF 8HP, VAG DQ380/381/500, MEG17.9.8, MEG17.9.13, MEG17.9.21, TC60/80. Supports Flash and EEPROM reading, writing, checksum corrections.
✅ Module 83 (https://ecutools.eu/chip-tuning/pcmflash/module-83/): VAG Bosch DQ380/DQ381/DQ500/ZF 8HP, designed to work via the diagnostic connector with DSG and automatic transmission units used in VAG vehicles. Reading (virtual), writing, checksum corrections.
✅ Module 84 (https://ecutools.eu/chip-tuning/pcmflash/module-84/): VAG Delphi DCM6.2 supports working via the diagnostic connector of VAG vehicles with Delphi DCM6.2 ECUs. Supports virtual reading, writing, checksum corrections.
✅ Module 85 (https://ecutools.eu/chip-tuning/pcmflash/module-85/): Ford Gearbox is designed for working via the diagnostic connector with 6HP28, 5R/6R/6 °F/8 °F/10R TCUs of various modifications used in Ford vehicles. Reading, writing and checksum corrections is supported.
➡️ Updates for the existing modules can be found here (https://ecutools.eu/publications/pcmflash-update-21022022/) ⬅️