In'Carius Craft

In'Carius Craft "In'Carius Craft" to pracownia rzemieślnicza specjalizująca się w broni białej i elementach skórzanych dla rekonstruktorów historii z wszelakich epok.

Wszystkie zdjęcia przedstawiają realne wytwory moich rąk. W przedmioty wykonywane przez siebie wkładam mnóstwo pasji, czasu i twórczego zapału. Miecze, sztylety, noże - tutaj każdy rycerz znajdzie coś dla siebie. Zapraszam do komentowania, oceniania i pytań.

//All photos show my own handmade stuff. I put a lot of passion, time and creative output in my crafts. Here every knight can find something what is right for him. Feel free to comment, apprise and ask me anything

A little update about the patterwelded type hand and half. This time with a guard and pommel (sorry for quality of photo...
24/07/2026

A little update about the patterwelded type hand and half. This time with a guard and pommel (sorry for quality of photos - during work od hard to catch a proper light).

This blade is made in a hand and half style - blade length is 105cm, total length 135 cm (tang with additional material), width at base 5.1cm and weight 1040g

Material is K720 + 15n20 steel forgewelded to the bar by Konrad Baron - all other work made by myself.

AVAILABLE as a bare blade or finished pieceThis is very light but also shor seax blade - totall lenght 73cm, blade is 54...
11/07/2026

AVAILABLE as a bare blade or finished piece

This is very light but also shor seax blade - totall lenght 73cm, blade is 54cm. Width at base 4.8cm, thickness arount 5mm and weight only 540g.

Material is K720 + 15n20 steel forgewelded to the bar by Konrad Baron - all other work made by myself.

Open for offers.

Have a nice weekend!

Regards Rafal

10/07/2026

AVAILABLE as a bare blade or finished piece.

This blade is made in a hand and half style - blade length is 105cm, total length 135 cm (tang with additional material), width at base 5.1cm and weight 1040g

Material is K720 + 15n20 steel forgewelded to the bar by Konrad Baron - all other work made by myself.

Quite light type XVIIIb with hollow grind crossection - making this type of blade took a really amount of time:Dimension...
08/07/2026

Quite light type XVIIIb with hollow grind crossection - making this type of blade took a really amount of time:

Dimension's:

Length - 124.5cm
Blade - 95.5cm,
Thickness at base - 8mm,
Width at base 4.5cm,
Weight -1380g
Edges - sharp
PoB - around 10cm

Quite courios piece - especially with additional finger hole. Totall length 95.5cmBlade 81.5cmWidth near finger hole 4.7...
23/06/2026

Quite courios piece - especially with additional finger hole.

Totall length 95.5cm
Blade 81.5cm
Width near finger hole 4.7cm
Thickness of blade 8mm
Grip 9.8cm
Edges Sharp
Weight around 1200g

Spodem scabbard with simply pattern on surface. As always all handmade

Fantasy falchion with wooden scabbard (brown colour).Totally lenght is 114cm, handle in hand and half style - balance al...
11/06/2026

Fantasy falchion with wooden scabbard (brown colour).

Totally lenght is 114cm, handle in hand and half style - balance allow to use in one or two hands. Inspired by medieval sources (original was inspired by paint and was one handed version - so its not a historical piece).

Weight around 1450g. Width at base around 6.4cm

A little bit custom (fantasy) falchion but based on a medieval paint. Enjoy
04/06/2026

A little bit custom (fantasy) falchion but based on a medieval paint. Enjoy

04/06/2026

AVAILABLE as a bare blade - 800euro

Material forged by Konrad Baron from K720 and 15n20 steel. Rest work by myself (making the shape and distal taper, making fullers, polishing, tempering, sharpening etc etc) :)

The most precious blade so far

Totally length 94cm
Blade length 75.5cm
Tang length 18.4cm
Width at base 5.2cm
Weight 870g
PoB 28cm

AVAILABLE Another "Norman" sword, this time with brass inlay (crosses on each side of fuller).Totall length - 105mBlade ...
19/05/2026

AVAILABLE

Another "Norman" sword, this time with brass inlay (crosses on each side of fuller).

Totall length - 105m
Blade length - 88.5cm
Width - 5cm near guard
Weigth - 1260g
Grip - around 10.5cm
Steel - 51CrV4
Edges - sharp

Enjoy.
Rafal 🙂

19/05/2026

Bare blade still available

Adres

Chrzanów

Strona Internetowa

Ostrzeżenia

Bądź na bieżąco i daj nam wysłać e-mail, gdy In'Carius Craft umieści wiadomości i promocje. Twój adres e-mail nie zostanie wykorzystany do żadnego innego celu i możesz zrezygnować z subskrypcji w dowolnym momencie.

Skontaktuj Się Z Firmę

Wyślij wiadomość do In'Carius Craft:

Skróty

Udostępnij