Gilman Amplifiers

04/08/2023

Skosh prototype packaged in it's yet to be covered box, ready for play test - who wants to be the first?
I've tested it so far with a kt-66 (about 13ish watts), a kt-88 (almost 18 watts), and a 6v6 ( output not measured but sounded really good). 6l6 and el34 are also an option but haven't tried either, yet.
Surprised how good the reverb sounded with a whole tube less than conventional circuits.
Can't wait to really crank it up.

03/30/2023

Ok here's one of the new designs we are working on - I'm calling it the Skosh ( until a better name comes along). It's a single ended ( think champ on steroids) at about 12 watts output with a kt66 ( can also use 6l6 or kt88) and can be scaled down to 1/8th of a watt.
It has spring reverb ( quite a feat with only 3 tubes - two 12ax7s plus power tube). Dialable boost that is footswitch selectable , tone control, reverb level, and volume with 2 levels of preamp gain positions.
Output 8 or 16 ohm speaker impedance.
I should have some sound clips to post soon.

03/24/2023

02/02/2023

Getting ready to create; developing a few new single-ended prototypes. Here are some single-ended output transformers to show size differences.
From left to right: 3 watt reverb driver, 5 watt champ style, 10 watt, 25 watt, 30 watt.
Forground: 15 watt push pull transformer.
Obviously, single-ended needs lots of iron!

08/17/2022

We are taking pre orders now!! Go to the link and get your hands on some of the best amps made right here in the USA!
Musican and Veteran owned! This is your chance to be heard!

Amp News Taking Pre-Orders NOW!!! TAKING PRE-ORDERS NOW Order your new Gilman amp now. Click the buttom to check out our offerings Shop Share on facebook Facebook Share on twitter Read More » June 12, 2022

06/11/2022

Taking pre-sale orders now!! Don't miss your chance to get these one of a kind, custom built tube amps made right here in the USA!

12/07/2020

Merry Christmas and Happy Yule!!!

09/29/2020

Gilman Amplifiers Staff!!!

Photo credit: Erica Wilson-Rapolla