Draven's Total Customs

Draven's Total Customs We are a small shop working out of my garage at this time. We take custom commissions as well as sel We work in everything and specialize in nothing.

We are a custom fabrication and design company, dealing with every thing from Theatre props and design to custom street legal motorcycles. We also do graphic design for your companies logo and advertising needs as well as repair work. If you can dream it, we can build it.

I have been playing around with making new display images for the items I sell. Next on the list is the Stealth Clone Pi...
03/18/2026

I have been playing around with making new display images for the items I sell. Next on the list is the Stealth Clone Pilot Chest Box Kit - Star Wars Inspired (3D Printed). This is a 3D printed kit for the Phase 1 Stealth Clone Pilot Chest Box. This kit was designed for the Stealth Clone Pilot that appeared in the Clone Wars Season 2 episode “Cat and Mouse”. The kit comes with the main box, backing plate of the main box, 4 buttons ( 3 rectangular and 1 round) and 4 Chicago screws. The chest box has an open back design and is hollow. This design makes the chest box light weight and has the ability to house small electrical system or battery pack. The main box will be printed from FDM printer out of PLA while the buttons will be printed in SLA resin.

This item is the same chest box that is featured in the 501st CRL for the Phase 1 Stealth Clone Pilot.

Link to shop in bio.

Have been playing around with making new display images for the items I sell. Next on the list is the Mandalorian Pilot ...
03/18/2026

Have been playing around with making new display images for the items I sell. Next on the list is the Mandalorian Pilot Chest Box Kit - Fenn Rau Mandalorian Protector Inspired - Star Wars Rebels. This is a 3D printed kit for the Mandalorian Pilot Chest Box. This kit was designed for the Mandalorian Pilots as seen in the Star Wars Rebels episode “Protectors of Concord Dawn”. The kit comes with the main box (split into 3 parts for ease printing and construction), backing plate of the main box, mounting plate spacer, 5 clear acrylic buttons, turn k**b, 2 hose connectors, LED light fixtures, 14 wooded alignment pins (2 - 9mm & 10 - 10mm) and 4 Chicago screws (2 - 3/4” & 2 - 1”) . The chest box has an open back design and is hollow. This design makes the chest box light weight and has the ability to house the small light fixtures and battery pack. The main box will be printed from FDM printer out of PLA while the k**b and hose connectors will be printed in SLA resin.
Shop link in bio.

Have been playing around with making new display images for the items I sell. Next on the list is another comm pad, it’s...
03/13/2026

Have been playing around with making new display images for the items I sell. Next on the list is another comm pad, it’s the GTVM Comm Pad - 2D Clone Wars inspired. This accessory piece is designed after the Comm pad on the Jedi General Voolvif Monn from the 2D animated Clone Wars micro-series. It is resin printed and near paint ready.
Shop link in bio.

Have been playing around with making new display images for the items I sell. Next on the list is the Mandalorian Comm P...
03/10/2026

Have been playing around with making new display images for the items I sell. Next on the list is the Mandalorian Comm Pad MK2 - Clone Wars Deathwatch inspired. This accessory piece is designed after the Comm pads on the Deathwatch Mandalorians from Star Wars Clone wars season 5 & 7. It is resin printed and near paint ready.
Shop link in bio.

Have been playing around with making new display images for the items I sell. Next on the list is the DSM Helmet - Drave...
03/09/2026

Have been playing around with making new display images for the items I sell. Next on the list is the DSM Helmet - Draven’s Standard Mando. It is approvable for modern and PI era in the Mandalorian Mercs. This helmet is a full resin cast helmet, so no pesky layer lines to deal with. The helmet is a cast of a full scratch helmet build I did using the Wizard of Flight helmet templates and a baseball batters helmet. With the right paint job this helmet can be used for many canon characters such as Jango Fett, Live action Deathwatch, Jaster Mereel or your own custom Mandalorian.
The kit comes with everything for a mandalorian helmet.
Shop link in bio.

Have been playing strong with making new display images for the items I sell. First off this is our Laaran Oya’Kar MK2 H...
03/08/2026

Have been playing strong with making new display images for the items I sell. First off this is our Laaran Oya’Kar MK2 Helmet Kit – Mandalorian Wolf Inspired Cosplay Helmet. It is approvable for modern era in the Mandalorian Mercs. This helmet is a full resin cast helmet, so no pesky layer lines to deal with. The helmet takes its inspiration from the Clone Wolf pack’s sigil.
The kit comes with everything for a mandalorian helmet.
Shop link in bio.

I just got done doing a full model of the Clone Wars Deathwatch gauntlets. This comes after the commission I just did wh...
02/23/2026

I just got done doing a full model of the Clone Wars Deathwatch gauntlets. This comes after the commission I just did where I used an older version of the gauntlets. I spent roughly 6hrs working on this model to get to this. I still need to do a little more work before they are ready to be put out publicly.

To help out with getting the best prints possible I purchased the 3D Printer Intelligent Mini Heater. When reading the ...
02/20/2026

To help out with getting the best prints possible I purchased the 3D Printer Intelligent Mini Heater. When reading the instructions they pertained to printers that have the the lift off lid and the Sonic Mega 8K has doors that open outward. So here is a tutorial on how I installed the heater with minimal damage to the machine.
The best thing I found when getting the cords out of the machine is through the lifting hand holds on the sides in the printer.
1. Remove the plastic hand holds from the side of the printer that the heater will be installed on. I installed it on the left hand side. Modify the handle by cutting a 1/2”x1/2” notch it the edge that is towards the rear of the printer.
2. Place the magnets on the heater and the bed of the printer as per the instructions. Make sure that there is enough room between the heater and the back wall of the printer to allow proper airflow.
3. Route the cords through the hand hold opening.
4. Place cable clips on the inside of the printer in 2 places for cable management. I used Wrap-it Cable Clips from .
5. Replace the modified handle making sure that both cables are routed through the notch and are not caught up by the handle.
6. Route your cables to your power source.

Hopefully this helps you install your heater in a printer that has a less than conventional door system, like a traditional door or even the flip up door.

02/19/2026

Part of a commission cuing in the tiny cure station I have.

02/19/2026

As I am installing a mini heater inside of my Sonic Mega 8K printer, I found that one of the foam packaging from the LCD screen fits nicely in the printer and helps protect the LCD screen from getting damaged.

I am doing some marking research and I need some feedback. If you couple please visit my shop (link in bio) and please a...
02/10/2026

I am doing some marking research and I need some feedback. If you couple please visit my shop (link in bio) and please answer these questions;

•If you were shopping for Star Wars costume pieces, what would you be looking for?

•Of the items in my shop, what stands out to you?

•Of our helmets, are the listings appealing?

•Of our helmets, what stands out to you?

•Of our helmets, what prevents you from purchasing one of them?

•Of our accessories, what is the most appealing?

•Of our accessoires, what prents you from purchasing them?

•What changes can I make that would make things more appealing?

Any and all input helps. Also you can get a 10% off coupon code for helping us out.

https://www.etsy.com/shop/DravensTotalCustoms

Address

Fairfield, CA
94533

Website

Alerts

Be the first to know and let us send you an email when Draven's Total Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Draven's Total Customs:

Shortcuts

Share