https://www.facebook.com/507666876083651/

For Gentlemen's Use

Home
United States
Goodyear, AZ
For Gentlemen's Use

Professional straight razor restoration, custom and replica scale fabrication, and honing. Thanks for visiting.

My name is Mike Rotondo and I've been restoring razors for several years. I offer a full range of straight razor restoration services as well as custom scale fabrication. Scales can be constructed of nearly any malleable material. Please message me to discuss your restoration requirements.

02/05/2024

***** SOLD *****

FGU Restored Near 8/8 All Original Wade & Butcher For Barbers Only Straight Razor

Wade & Butcher For Barbers Only are extremely rare, especially in this condition. The width of the blade at its widest point is 1/16 short of 8/8. I dismantled and restored all of the components of this razor. Everything is original. I restored this very heavy quarter hollow to a polished, machined finish following the original manufacturer grind marks. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. The excellent etching is completely intact on the tang. It has a very thin bevel and it took an excellent edge. The original horn scales are straight and are polished to a high shine. I finished the razor with the original lead wedge and brass beehive collars. Honed to 30k Shapton Glass and stropped to shave ready.

$500 FREE WORLDWIDE SHIPPING

01/24/2024

***** SOLD *****

FGU Restored 15/16 All Original Wostenholm & Sons For Barber's Use Straight Razor

Wosty For Barber's Use are very rare, especially in this condition. I dismantled and restored all of the original components of this razor.
I restored this very heavy near wedge to a polished, machined finish following the original manufacturer grind marks. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. The excellent etching is intact on both the blade face and tang. It has a very thin bevel and it took an excellent edge. The original horn scales are straight and polished to a high shine. I finished the razor with the original lead wedge and brass beehive collars. Honed to 30k glass Shapton and stropped to shave ready.

$425 FREE WORLDWIDE SHIPPING

01/22/2024

***** SOLD *****

FGU Restored Near 15/16 All Original Wade & Butcher Celebrated Straight Razor

I dismantled and restored all of the components of this razor. Everything is original. I restored the large quarter-half hollow blade to a polished finish following the original manufacturer grind marks. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. I did not over grind the blade faces as to keep the excellent etching intact. It has a thin bevel and it took an excellent edge. The original horn scales are as straight as they could be and are polished to a high shine. I finished the razor with the original lead wedge and brass collars. Honed to H5+ JNAT and stropped to shave ready.

$300 plus shipping

12/29/2023

***** SOLD *****

FGU Restored Near 17/16 All Original Celebrated Hollow Ground IXL George Wostenholm & Sons For Barbers Use For Gentlemen's Use

The actual width of the blade is 1/32 under 17/16 at its widest point. I dismantled and restored all of the components of this razor. Everything is original. I restored the large quarter-half hollow blade to a polished machined finish following the original manufacturer grind marks. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. I did not over grind the blade faces as to keep the excellent etching intact. It has a very thin bevel and it took an excellent edge. The original horn scales are as straight as they could be as they are shaped and are polished to a high shine. I finished the razor with the original lead wedge and brass beehive collars. Honed to H5+ JNAT and stropped to shave ready.

$525 plus shipping

10/19/2022

**** SOLD **** FGU Restored 17/16 Wade & Butcher Celebrated For Barber's Use Straight Razor - 600USD

I restored this heavy quarter hollow to a polished finish following the original manufacturer grind marks. I only used very high grit abrasives to preserve the blade face etching. "Celebrated" FBU blades date back to the mid 19th century and those with intact blade face etching are hard to find. The width of the blade at its widest is a hair over 17/16 and it has a 1/4 inch plus wide spine. It took an excellent edge as do all Butcher razors. I restored the original buffalo horn scales and polished them to a high luster. I finished the razor with the original lead wedge and original brass beehive collars. Honed to H5+ JNAT and stropped to shave ready.

Your choice of either Ppal F&F (Free to US) or G&S +4%.

10/14/2022

FGU Restored 8/8 Wade & Butchers For Barbers Use - 500USD

I restored this large, heavy near wedge to a polished machined finish following the original manufacturer grind marks. "Wade & Butcher For Barbers Use" blades with larger print were manufactured between 1840 & 1880. The tang stamp lettering is complete, deep, and clear, which is somewhat rare with these blades. The width of the blade at its widest is a hair short of 8/8. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. The blade faces are flat, square, and even. It has an extremely thin bevel and it took an excellent edge as do all Butchers. I made the polished scales from black G10. G10 is an extremely strong material and will last forever if not abused. I finished the razor with a polished black acrylic wedge and polished solid stainless steel triple stack collars. Honed to H5+ JNAT and stropped to shave ready.

09/25/2022

***** SOLD ***** - FGU Restored Near 17/16 Wade & Butchers For Barbers Use - 500USD

I restored this large, heavy quarter hollow to a polished machined finish following the original manufacturer grind marks. "Wade & Butcher For Barbers Use" blades with larger print were manufactured between 1840 & 1880. The width of the blade at its widest is 1/32 short of 17/16. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. The blade faces are very flat, square, and even. It has an extremely thin bevel and it took an excellent edge as do all Butchers. I made the polished scales from black G10. G10 is an extremely strong material and will last forever if not abused. I finished the razor with a polished black acrylic wedge and polished solid stainless steel triple stack collars. Honed to H5+ JNAT and stropped to shave ready.

09/14/2022

***** SOLD ***** FGU Restored 13/16 W. Greaves & Sons WR Trademark Universally Approved - 250USD

I restored this heavy wedge to a polished machined finish following the original manufacturer grind marks. WR crown stamped blades are very rare and are among the earliest Greaves razors, which were manufactured between 1830 and 1837. The width of the blade at its widest is 13/16. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. I also ground the blade in a way to ensure the blade face stamp was not greatly affected. It has a very thin bevel and it took an excellent edge as do all Greaves razors. I straightened and restored the original buffalo horn scales and polished them to a high luster. They look fantastic. I finished the razor with the original polished lead wedge and original polished brass collars. Honed to H5+ JNAT and stropped to shave ready.

Worldwide shipping up to $15 included, which will pay for USPS First Class International.

250USD

04/30/2022

***** SOLD *****

Restored 6/8 Wade & Butcher Royal VR Mark Straight Razor

I restored this heavy near wedge to a polished machined finish following the original manufacturer grind marks. VR marked Wade & Butchers are very rare and finding one with a deep, clear tang stamp is even rarer. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. The blades faces are very flat and even. It has a very thin bevel and it took an excellent edge as do all Butchers. I straightened, restored, and polished the original camel bond scales. I finished the the razor with the original lead wedge and polished solid brass dome collars. Honed to H5+ JNAT and stropped to shave ready.

Your choice of either Ppal F&F (Free to US) or G&S +4%.

225USD

04/24/2022

***** SOLD *****

Restored 13/16 W. Greaves & Sons Sheaf Works Straight Razor

I restored this half-quarter hollow to a polished machined finish following the original manufacturer grind marks. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. It has a thin bevel and it took an excellent edge as do all Greaves. I made the traditional shaped scales from translucent red tortoise acrylic. I finished the the razor with a smoke acrylic wedge and polished solid brass cup collars. Honed to H5+ JNAT and stropped to shave ready. I could not get the blade to close in the center of the scales. It closes towards the back scale, so the blade will need to be guided in the scales. Some Sheffield tangs are very wonky as these razors were cast in a mold and I suppose the molds became a bit worn over time. However, I always recommend guiding a straight razor blade closed anyway and the bevel rests in the middle when closed. Honed to H5+ JNAT and stropped to shave ready.

Your choice of either Ppal F&F (Free to US) or G&S +4%.

180USD

03/18/2022

****** SOLD ******

Restored Near 8/8 George Wostenholm & Sons

I restored this very heavy near wedge to a polished machined finish following the original manufacturer grind marks. Like all my restorations, I kept the lines of the blade sharp and clean, which has maintained the esthetic of the razor. The width of the blade at its widest is less than 1/32 short of 8/8 and it has a 1/4+ thick spine. It has a very thin bevel and it took an excellent edge as do all Wostys. I made the traditional shaped scales from polished battleship grey G10. G10 is extremely strong and will last a lifetime if not abused. I finished the the razor with a smoke acrylic wedge and polished solid copper triple stack collars. Honed to H5+ JNAT and stropped to shave ready.

Your choice of either Ppal F&F (Free to US) or G&S +4%.

Worldwide shipping up to $15 included. That will pay for USPS First Class International. However, there are worldwide delays with that service due to covid, so if you like I can provide shipping quotes from multiple providers that may be more reliable at this time.

375 USD

12/15/2021

****SOLD****

Restored Near 17/16 George Wostenholm & Sons IXL

Big Wostys are rare. The width of the blade is 1/32 short of 17/16 at its widest point. I restored this large quarter hollow to a polished machined finish following the original manufacturer grind marks. It has a thin bevel and it took an excellent edge as do all Wostys. I made the scales from black G10 and ground them to reflect the grain of the material. The grain pattern came out perfect and the material is a good substitute for black horn. G10 is extremely strong and will last forever if not abused. I finished the razor with the original Sheffield lead wedge and polished small solid stainless cup collars. Honed to H5+ JNAT and stropped to shave ready.

500USD

Address

Goodyear, AZ
85338

Website

facebook.com

Alerts

Be the first to know and let us send you an email when For Gentlemen's Use posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Clothing Store in Goodyear?